Emerson Telecaster Thinline 4-Way 500K Pre-Wired Kit

Emerson Telecaster Thinline 4-Way 500K Pre-Wired Kit
Brand: Emerson
Product Code: Emerson Telecaster Thinline 4-Way 500K Pre-Wired Kit
Condition: New
Price: Rp. 1,840,000,-

Emerson Telecaster Thinline 4-Way 500K Pre-Wired Kit


The only difference between this kit and our standard T4 Prewired Kit is the spacing. This is a Telecaster Prewired Kit built and spaced especially for Thinlines (Controls Mounted on the Pickguard, NOT the control plate).
 
Spacing 
Center of Tone Knob to Center of Volume Knob is 2.00" 
Center of Volume Knob to Center of 3-Way Switch is 2.00"
We build these kits specifically for the thinline setup and spacing. If your volume and tone knobs are 2.00" (center to center of knob) Than this kit will work for you. If your knobs are under 2.00" apart in spacing this kit will still work... Simply use your thumb and create a slight inward radius (curve) on the teflon coated buss wire towards the center of the wiring kit to shorten the buss wire length allowing for a shorter control knob spacing.
 
Includes 
(2) Emerson PRO CTS Solid Shaft w/.375" (3/8") Shaft Length 
(1) Oak Grigsby 4-Way Switch 
(1) Switchcraft 1/4" Mono Input Jack 
(1) 0.047uf Emerson Paper in Oil Capacitor *(0.022uf are used with 500K-Ohm Pots Option)* 
(1) Volume Mod 
Wiring Diagram
 
Switch Positions 
Bridge 
Bridge & Neck in Parallel 
Neck 
Bridge & Neck in Series (Humbucker Type Fullness)
 
Additional Information
If you plan on using Humbuckers with this setup, you MUST use Pickups with 4-Conductor wire... 2-Conductor Humbuckers will NOT work properly with the 4-Way Setup.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



TwOJaH Musical Instruments Lab © 2012